Specifications
Maximum Power
|
500W |
---|---|
Laser Wavelength
|
Fiber or YAG Laser 1064nm, CO2 Laser 10.6um, or 532nm and 355nm |
Focal lens Cooling
|
Water or Air Cooled |
Proper alignment of optics after working distance adjusted
|
+/- 0.1mm |
Working distance adjustable range
|
0mm-42mm (not the working distance but the adjustable range) |
Mirror Diameter
|
38.1mm |
Reflection
|
>99.5% |
Input Diameters
|
24mm maximum |
Mirror tilt angle
|
Adjustable,+/- 3degree |
Focal length
|
Specified by clients |
• It has a reflect mirror with diameter of 38.1mm and coating’s reflection more than 99.5%.
• It has mount for reflect mirror. The input beam diameter maximum is 24mm.
• The titled degree of the mirror could be adjusted with four adjusting screws.
• It has the Focal lens with different focal length, such as 50.8mm and 63.5mm, which can be selected by clients. and the working distance could be adjusted by the guider.
• It has the holder for focal lens with WATER or AIR COOLED device. The device has the water/air input and output connectors. You just need insert the pipe into the connectors.
• It has the linear guider with high precision.
• The Working Distance of the focal length could be adjusted by the screw pole.
Laser NOZZLES
Nozzles are traditionally very difficult and expensive to manufacture due to the very long tapered bore.
Advantages of the use of copper cutting nozzles:
- Exact process gas guidance above or into the cutting gap
- Optical lenses are protected from flying sparks, vapours and particles
- Easy to change
- No wear
- Laser Nozzle Housings
- Laser Nozzle Tips
- Laser Nozzle Body's
- Laser Nozzle Insulators (Ceramic)
- Laser Nozzle Tips made Special
- Laser Nozzle Tips Modified
- Chrome Plated Laser Nozzles
- Copper Laser Nozzles
- Aluminum Laser Nozzles
- Graphite Laser Nozzles